Bridgetek VM816C Development Modules are used to develop and demonstrate the functionality of the BT816 Embedded Video Engine (EVE). There are 2 variations of the modules. The SPI variation of the Bridgetek VM816C module behaves as an SPI slave and requires an SPI Master for proper micro-controller interfacing and system integration. The USB variation of the module behaves as a USB slave and requires control from a USB host. Customers can order a module PCBA together with a 5” LCD panel pre-assembled and tested at the factory, or order a module PCBA only. For the module PCBA, users can also connect to different LCD screens as long as they meet the BT816 technical specification and fit the LCD connector.
Features
Ready to use LCD module
Options with or without 5” LCDs supporting resistive touch with pressure sensing
Onboard LCD backlight LED Driver
Supports mono audio output
Supports single or quad SPI (for VM816C50A modules)
Onboard audio power amplifier and an audio connector for external speaker support
A flexible power supply that is powered by SPI host connector, via USB Micro-B port, or via a 2.1mm DC power jack
Onboard 16M Byte IC Flash Memory
Support USB high-speed connection to PC or another USB host (for VM816CU50A modules)
Options
VM816C50A-D is the SPI version with 5” LCD
VM816CU50A-D is the USB version with 5” LCD
VM816C50A-N is the SPI version with 4.3/5/7” LCD connector but no display
VM816CU50A-N is the USB version with 4.3/5/7” LCD connector but no display
