All Results (579)

Sensor Cables / Actuator Cables

Multiple Function Sensor Modules Digital triaxial accelerometer and temperature sensor with MODBUS output; kit including cable, mounting stud, magnet mount, and screw mount

Vibration Sensors Top exit, 105 C, 4-20mA sensor proportional to velocity, RMS, 0.5 IPS full-scale, 1/4-28 tapped hole, 2-pin MIL-C-5015 connector

Accelerometers Embedded accelerometer; 100 mV/g sensitivity, +/- 5 tolerance; 180 W power consumption, 60 A very low current draw, operates down to 3 VDC; TO5 standard housing, .36" x .38", 304L stainless steel case; weighs 3.2 grams

Acceleration Sensor Modules Top exit 731A sensor and P31 low noise power/amplifier system with R6-2T-J9-10 cable. 1X, 10X, 100X selectable gain, low pass filter

Acceleration Sensor Modules Top-exit, helicopter accelerometer, 3-pin MIL-C-26482 connector, case isolated, 1/4-28 integral stud, 40 mV/g, +/-5% sensitivity tolerance

Acceleration Sensor Modules Top exit, velocity output, case isolated, MIL-C-5015 connector, 500 mV/in/sec, +/-10% sensitivity tolerance

Signal Conditioning Factory configured vibration transmitter, IEPE sensor input, 2 x 4-20 mA outputs, supports single and dual output sensors; configuration details: acceleration input, 500 mV/g accelerometer sensitivity, true RMS, velocity output, 1 ips full scale, 1-1

Vibration Sensors Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional Velocity, RMS, 1.0 ips (25.4 mm/sec), blunt cut cable, 4 meter PVC coated leads standard, add 25.00, up to 75 meters.

Acceleration Sensor Modules Top exit, general purpose, case isolated, 100 mV/g, +/-5% sensitivity tolerance, MIL-C-5015 connector, Class I Div 1 certified intrinsically safe

Vibration Sensors Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Velocity, Equivalent Peak, 1.0 ips (25.4 mm/sec), MIL-C-5015 connector.

Acceleration Sensor Modules Top exit, low noise floor, high sensitivity, microdot connector, base isolated, 500 mV/g, +/-5% sensitivity tolerance