|
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
- PRT-10364
- SparkFun
-
1:
Rp26.276
-
101In Stock
|
Mouser Part No
474-PRT-10364
|
SparkFun
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
|
|
101In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
- PRT-10365
- SparkFun
-
1:
Rp27.677
-
58In Stock
|
Mouser Part No
474-PRT-10365
|
SparkFun
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
|
|
58In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
- PRT-10366
- SparkFun
-
1:
Rp26.976
-
173In Stock
|
Mouser Part No
474-PRT-10366
|
SparkFun
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
|
|
173In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D
- PRT-10367
- SparkFun
-
1:
Rp34.158
-
63In Stock
|
Mouser Part No
474-PRT-10367
|
SparkFun
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D
|
|
63In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments
- PRT-10368
- SparkFun
-
1:
Rp34.684
-
39In Stock
|
Mouser Part No
474-PRT-10368
|
SparkFun
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments
|
|
39In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:
- PRT-10369
- SparkFun
-
1:
Rp34.859
-
169In Stock
|
Mouser Part No
474-PRT-10369
|
SparkFun
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:
|
|
169In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:
- PRT-10370
- SparkFun
-
1:
Rp40.815
-
93In Stock
|
Mouser Part No
474-PRT-10370
|
SparkFun
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:
|
|
93In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D
- PRT-10371
- SparkFun
-
1:
Rp35.560
-
152In Stock
-
60On Order
|
Mouser Part No
474-PRT-10371
|
SparkFun
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D
|
|
152In Stock
60On Order
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments:
- PRT-10372
- SparkFun
-
1:
Rp43.793
-
305In Stock
|
Mouser Part No
474-PRT-10372
|
SparkFun
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments:
|
|
305In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocument
- PRT-10373
- SparkFun
-
1:
Rp43.793
-
84In Stock
|
Mouser Part No
474-PRT-10373
|
SparkFun
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocument
|
|
84In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments
- PRT-10374
- SparkFun
-
1:
Rp48.172
-
97In Stock
|
Mouser Part No
474-PRT-10374
|
SparkFun
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments
|
|
97In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments
- PRT-10375
- SparkFun
-
1:
Rp51.675
-
42In Stock
|
Mouser Part No
474-PRT-10375
|
SparkFun
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments
|
|
42In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments:
- PRT-10376
- SparkFun
-
1:
Rp48.172
-
97In Stock
|
Mouser Part No
474-PRT-10376
|
SparkFun
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments:
|
|
97In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This DC power jack/connector is just like the other one that we carry except that it's terminated with breadboard-friendly pins instead of wide solder terminals. These are also compatible with our DC wall supplies and have a 5.5mm jack with a 2.1mm
- PRT-10811
- SparkFun
-
1:
Rp21.896
-
528In Stock
|
Mouser Part No
474-PRT-10811
|
SparkFun
|
SparkFun Accessories This DC power jack/connector is just like the other one that we carry except that it's terminated with breadboard-friendly pins instead of wide solder terminals. These are also compatible with our DC wall supplies and have a 5.5mm jack with a 2.1mm
|
|
528In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories These are 155mm long jumpers terminated as male to male. Use these to jumper from any female header on any board to any other female header. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred ju
- PRT-10897
- SparkFun
-
1:
Rp481.718
-
8In Stock
-
6On Order
|
Mouser Part No
474-PRT-10897
|
SparkFun
|
SparkFun Accessories These are 155mm long jumpers terminated as male to male. Use these to jumper from any female header on any board to any other female header. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred ju
|
|
8In Stock
6On Order
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories These are 155mm long jumpers terminated as female to female. Use these to jumper from any male header on any board to any other male header. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred ju
- PRT-10898
- SparkFun
-
1:
Rp481.718
-
10In Stock
|
Mouser Part No
474-PRT-10898
|
SparkFun
|
SparkFun Accessories These are 155mm long jumpers terminated as female to female. Use these to jumper from any male header on any board to any other male header. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred ju
|
|
10In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Hook-Up Wire Assort. Stranded, 22 AWG
- PRT-11375
- SparkFun
-
1:
Rp452.814
-
48In Stock
|
Mouser Part No
474-PRT-11375
|
SparkFun
|
SparkFun Accessories Hook-Up Wire Assort. Stranded, 22 AWG
|
|
48In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories 6-Pin Chassis Connect Panel Mount
- PRT-11475
- SparkFun
-
1:
Rp78.827
-
6In Stock
|
Mouser Part No
474-PRT-11475
|
SparkFun
|
SparkFun Accessories 6-Pin Chassis Connect Panel Mount
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is your tried and true white solderless breadboard. It has 2 power buses 10 columns and 30 rows - a total of 400 tie in points. All pins are spaced by a standard 0.1". The two sets of five columns are separated by about 0.3" perfect for strad
- PRT-12002
- SparkFun
-
1:
Rp109.481
-
29In Stock
|
Mouser Part No
474-PRT-12002
|
SparkFun
|
SparkFun Accessories This is your tried and true white solderless breadboard. It has 2 power buses 10 columns and 30 rows - a total of 400 tie in points. All pins are spaced by a standard 0.1". The two sets of five columns are separated by about 0.3" perfect for strad
|
|
29In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This white Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! If you run out of room n
- PRT-12043
- SparkFun
-
1:
Rp91.964
-
15In Stock
|
Mouser Part No
474-PRT-12043
|
SparkFun
|
SparkFun Accessories This white Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! If you run out of room n
|
|
15In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is the SparkFun Solderable Breadboard. A bare PCB that is the exact size as our regular breadboard with the same connections to pins and power rails. This board is especially useful for preserving a prototype or experiment you just created on a
- PRT-12070
- SparkFun
-
1:
Rp123.145
-
95In Stock
|
Mouser Part No
474-PRT-12070
|
SparkFun
|
SparkFun Accessories This is the SparkFun Solderable Breadboard. A bare PCB that is the exact size as our regular breadboard with the same connections to pins and power rails. This board is especially useful for preserving a prototype or experiment you just created on a
|
|
95In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Description: This is one giant solderless breadboard! It has 7 power buses 40 columns and 63 rows - with a total of 3220 tie in points. All pins are spaced by a standard 0.1". The two sets of five columns are separated by about 0.3" perfect for st
- PRT-12614
- SparkFun
-
1:
Rp546.005
-
19In Stock
|
Mouser Part No
474-PRT-12614
|
SparkFun
|
SparkFun Accessories Description: This is one giant solderless breadboard! It has 7 power buses 40 columns and 63 rows - with a total of 3220 tie in points. All pins are spaced by a standard 0.1". The two sets of five columns are separated by about 0.3" perfect for st
|
|
19In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Description: This is your tried and true full size solderless breadboard! It has 2 split power buses 10 columns and 63 rows - with a total of 830 tie in points. All pins are spaced by a standard 0.1". The two sets of five columns are separated by a
- PRT-12615
- SparkFun
-
1:
Rp135.757
-
36In Stock
|
Mouser Part No
474-PRT-12615
|
SparkFun
|
SparkFun Accessories Description: This is your tried and true full size solderless breadboard! It has 2 split power buses 10 columns and 63 rows - with a total of 830 tie in points. All pins are spaced by a standard 0.1". The two sets of five columns are separated by a
|
|
36In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Solder-able Breadboard Large
- PRT-12699
- SparkFun
-
1:
Rp230.699
-
35In Stock
-
26On Order
|
Mouser Part No
474-PRT-12699
|
SparkFun
|
SparkFun Accessories Solder-able Breadboard Large
|
|
35In Stock
26On Order
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories These are 6" long jumper wires with female connectors on both ends. Use these to jumper from any male header on any board to any other male header. Combine these with our male to male jumpers to create a male to female jumper. Multiple jumpers can b
- PRT-12796
- SparkFun
-
1:
Rp48.172
-
481In Stock
|
Mouser Part No
474-PRT-12796
|
SparkFun
|
SparkFun Accessories These are 6" long jumper wires with female connectors on both ends. Use these to jumper from any male header on any board to any other male header. Combine these with our male to male jumpers to create a male to female jumper. Multiple jumpers can b
|
|
481In Stock
|
|
Min.: 1
Mult.: 1
|
|
|